@ -24,97 +24,67 @@ indicates the type (and often the length) of the VPack value at hand:
We first give an overview with a brief but accurate description for
reference, for arrays and objects see below for details:
- 0x00 : none - this indicates absence of any type and value,
this is not allowed in VPack values
- 0x01 : empty array
- 0x02 : array without index table (all subitems have the same
byte length), 1-byte byte length
- 0x03 : array without index table (all subitems have the same
byte length), 2-byte byte length
- 0x04 : array without index table (all subitems have the same
byte length), 4-byte byte length
- 0x05 : array without index table (all subitems have the same
byte length), 8-byte byte length
- 0x06 : array with 1-byte index table offsets, bytelen and # subvals
- 0x07 : array with 2-byte index table offsets, bytelen and # subvals
- 0x08 : array with 4-byte index table offsets, bytelen and # subvals
- 0x09 : array with 8-byte index table offsets, bytelen and # subvals
- 0x0a : empty object
- 0x0b : object with 1-byte index table offsets, sorted by
attribute name, 1-byte bytelen and # subvals
- 0x0c : object with 2-byte index table offsets, sorted by
attribute name, 2-byte bytelen and # subvals
- 0x0d : object with 4-byte index table offsets, sorted by
attribute name, 4-byte bytelen and # subvals
- 0x0e : object with 8-byte index table offsets, sorted by
attribute name, 8-byte bytelen and # subvals
- 0x0f : object with 1-byte index table offsets, not sorted by
attribute name, 1-byte bytelen and # subvals
- 0x10 : object with 2-byte index table offsets, not sorted by
attribute name, 2-byte bytelen and # subvals
- 0x11 : object with 4-byte index table offsets, not sorted by
attribute name, 4-byte bytelen and # subvals
- 0x12 : object with 8-byte index table offsets, not sorted by
attribute name, 8-byte bytelen and # subvals
- 0x13 : compact array, no index table
- 0x14 : compact object, no index table
- 0x15-0x16 : reserved
- 0x17 : illegal - this type can be used to indicate a value that
is illegal in the embedding application
- 0x18 : null
- 0x19 : false
- 0x1a : true
- 0x1b : double IEEE-754, 8 bytes follow, stored as little
endian uint64 equivalent
- 0x1c : UTC-date in milliseconds since the epoch, stored as 8 byte
signed int, little endian, two's complement
- 0x1d : external (only in memory): a char* pointing to the actual
place in memory, where another VPack item resides, not
allowed in VPack values on disk or on the network
- 0x1e : minKey, nonsensical value that compares < than all other values
- 0x1f : maxKey, nonsensical value that compares > than all other values
- 0x20-0x27 : signed int, little endian, 1 to 8 bytes, number is V - 0x1f,
two's complement
- 0x28-0x2f : uint, little endian, 1 to 8 bytes, number is V - 0x27
- 0x30-0x39 : small integers 0, 1, ... 9
- 0x3a-0x3f : small negative integers -6, -5, ..., -1
- 0x40-0xbe : UTF-8-string, using V - 0x40 bytes (not Unicode characters!),
length 0 is possible, so 0x40 is the empty string,
maximal length is 126, note that strings here are not
zero-terminated and may contain NUL bytes
- 0xbf : long UTF-8-string, next 8 bytes are length of string in
bytes (not Unicode characters) as little endian unsigned
integer, note that long strings are not zero-terminated
and may contain NUL bytes
- 0xc0-0xc7 : binary blob, next V - 0xbf bytes are the length of blob in
bytes, note that binary blobs are not zero-terminated
- 0xc8-0xcf : positive long packed BCD-encoded float, V - 0xc7 bytes follow
that encode in a little endian way the length of the
mantissa in bytes. Directly after that follow 4 bytes
encoding the (power of 10) exponent, by which the mantissa
is to be multiplied, stored as little endian two's
complement signed 32-bit integer. After that, as many
bytes follow as the length information at the beginning
has specified, each byte encodes two digits in
big-endian packed BCD
Example: 12345 decimal can be encoded as
0xc8 0x03 0x00 0x00 0x00 0x00 0x01 0x23 0x45
or 0xc8 0x03 0xff 0xff 0xff 0xff 0x12 0x34 0x50
- 0xd0-0xd7 : negative long packed BCD-encoded float, V - 0xcf bytes
follow that encode in a little endian way the length of
the mantissa in bytes. After that, same as positive long
packed BCD-encoded float above.
- 0xd8-0xed : reserved
- 0xee-0xef : value tagging for logical types
- 0xf0-0xff : custom types
- `0x00` : none - this indicates absence of any type and value, this is not allowed in VPack values
- `0x01` : empty array
- `0x02` : array without index table (all subitems have the same byte length), 1-byte byte length
- `0x03` : array without index table (all subitems have the same byte length), 2-byte byte length
- `0x04` : array without index table (all subitems have the same byte length), 4-byte byte length
- `0x05` : array without index table (all subitems have the same byte length), 8-byte byte length
- `0x06` : array with 1-byte index table offsets, bytelen and # subvals
- `0x07` : array with 2-byte index table offsets, bytelen and # subvals
- `0x08` : array with 4-byte index table offsets, bytelen and # subvals
- `0x09` : array with 8-byte index table offsets, bytelen and # subvals
- `0x0a` : empty object
- `0x0b` : object with 1-byte index table offsets, sorted by attribute name, 1-byte bytelen and # subvals
- `0x0c` : object with 2-byte index table offsets, sorted by attribute name, 2-byte bytelen and # subvals
- `0x0d` : object with 4-byte index table offsets, sorted by attribute name, 4-byte bytelen and # subvals
- `0x0e` : object with 8-byte index table offsets, sorted by attribute name, 8-byte bytelen and # subvals
- `0x0f` : object with 1-byte index table offsets, not sorted by attribute name, 1-byte bytelen and # subvals
- `0x10` : object with 2-byte index table offsets, not sorted by attribute name, 2-byte bytelen and # subvals
- `0x11` : object with 4-byte index table offsets, not sorted by attribute name, 4-byte bytelen and # subvals
- `0x12` : object with 8-byte index table offsets, not sorted by attribute name, 8-byte bytelen and # subvals
- `0x13` : compact array, no index table
- `0x14` : compact object, no index table
- `0x15` -`0x16` : reserved
- `0x17` : illegal - this type can be used to indicate a value that is illegal in the embedding application
- `0x18` : null
- `0x19` : false
- `0x1a` : true
- `0x1b` : double IEEE-754, 8 bytes follow, stored as little endian uint64 equivalent
- `0x1c` : UTC-date in milliseconds since the epoch, stored as 8 byte signed int, little endian, two's complement
- `0x1d` : external (only in memory): a char* pointing to the actual place in memory, where another VPack item
resides, not allowed in VPack values on disk or on the network
- `0x1e` : minKey, nonsensical value that compares < than all other values
- `0x1f` : maxKey, nonsensical value that compares > than all other values
- `0x20` -`0x27` : signed int, little endian, 1 to 8 bytes, number is V - `0x1f` , two's complement
- `0x28` -`0x2f` : uint, little endian, 1 to 8 bytes, number is V - `0x27`
- `0x30` -`0x39` : small integers 0, 1, ... 9
- `0x3a` -`0x3f` : small negative integers -6, -5, ..., -1
- `0x40` -`0xbe` : UTF-8-string, using V - `0x40` bytes (not Unicode characters!), length 0 is possible, so `0x40` is the
empty string, maximal length is 126, note that strings here are not zero-terminated and may contain NUL bytes
- `0xbf` : long UTF-8-string, next 8 bytes are length of string in bytes (not Unicode characters) as little
endian unsigned integer, note that long strings are not zero-terminated and may contain NUL bytes
- `0xc0` -`0xc7` : binary blob, next V - `0xbf` bytes are the length of blob in bytes, note that binary blobs are not
zero-terminated
- `0xc8` -`0xcf` : positive long packed BCD-encoded float, V - `0xc7` bytes follow that encode in a little endian way the
length of the mantissa in bytes. Directly after that follow 4 bytes encoding the (power of 10) exponent, by which the
mantissa is to be multiplied, stored as little endian two's complement signed 32-bit integer. After that, as many
bytes follow as the length information at the beginning has specified, each byte encodes two digits in big-endian
packed BCD. Example: 12345 decimal can be encoded as
`c8 03 00 00 00 00 01 23 45` or
`c8 03 ff ff ff ff 12 34 50`
- `0xd0` -`0xd7` : negative long packed BCD-encoded float, V - `0xcf` bytes follow that encode in a little endian way the
length of the mantissa in bytes. After that, same as positive long packed BCD-encoded float above.
- `0xd8` -`0xed` : reserved
- `0xee` -`0xef` : value tagging for logical types
- `0xf0` -`0xff` : custom types
## Arrays
Empty arrays are simply a single byte 0x01.
Empty arrays are simply a single byte `0x01` .
We next describe the type cases 0x02 to 0x09, see below for the
special compact type 0x13.
We next describe the type cases `0x02` to `0x09` , see below for the special compact type `0x13` .
Non-empty arrays look like one of the following:
@ -157,64 +127,48 @@ or
INDEXTABLE with 8 byte per entry
NRITEMS in 8 bytes
If any optional padding is allowed for a type, the padding must consist
of exactly that many bytes that the length of the padding, the length of
BYTELENGTH and the length of NRITEMS (if present) sums up to 8. If the
length of BYTELENGTH is already 8, there is no padding allowed. The
entire padding must consist of zero bytes (ASCII NUL).
If any optional padding is allowed for a type, the padding must consist of exactly that many bytes that the length of
the padding, the length of BYTELENGTH and the length of NRITEMS (if present) sums up to 8. If the length of BYTELENGTH
is already 8, there is no padding allowed. The entire padding must consist of zero bytes (ASCII NUL).
Numbers (for byte length, number of subvalues and offsets in the
INDEXTABLE) are little endian unsigned integers, using 1 byte for
types 0x02 and 0x06, 2 bytes for types 0x03 and 0x07, 4 bytes for types
0x04 and 0x08, and 8 bytes for types 0x05 and 0x09.
Numbers (for byte length, number of subvalues and offsets in the INDEXTABLE) are little endian unsigned integers, using
1 byte for types `0x02` and `0x06` , 2 bytes for types `0x03` and `0x07` , 4 bytes for types
`0x04` and `0x08` , and 8 bytes for types `0x05` and `0x09` .
NRITEMS is a single number as described above.
The INDEXTABLE consists of:
- for types 0x06-0x09 an array of offsets (unaligned, in the number
format described above) earlier offsets reside at lower addresses.
Offsets are measured from the start of the VPack value.
Non-empty arrays of types 0x06 to 0x09 have a small header including
their byte length, the number of subvalues, then all the subvalues and
finally an index table containing offsets to the subvalues. To find the
index table, find the number of subvalues, then the end, and from that
the base of the index table, considering how wide its entries are.
For types 0x02 to 0x05 there is no offset table and no number of items.
The first item begins at address A+2, A+3, A+5 or respectively A+9,
depending on the type and thus the width of the byte length field. Note
the following special rule: The actual position of the first subvalue
is allowed to be further back, after some run of padding zero bytes.
For example, if 2 bytes are used for both the byte length (BYTELENGTH),
then an optional padding of 4 zero bytes is then allowed to follow, and
the actual VPack subvalues can start at A+9.
This is to give a program that builds a VPack value the opportunity to
reserve 8 bytes in the beginning and only later find out that fewer bytes
suffice to write the byte length. One can determine the number of
subvalues by finding the first subvalue, its byte length, and
dividing the amount of available space by it.
For types 0x06 to 0x09 the offset table describes where the subvalues
reside. It is not necessary for the subvalues to start immediately after
the number of subvalues field.
As above, it is allowed to include optional padding. Again here, any
padding must consist of a run of consecutive zero bytes (ASCII NUL) and
must be as long that it fills up the length of BYTELENGTH and the length
of NRITEMS to 8.
For example, if both BYTELENGTH and NRITEMS can be expressed using 2 bytes
each, the sum of their lengths is 4. It is therefore allowed to add 4
bytes of padding here, so that the first subvalue could be at address A+9.
There is one exception for the 8-byte numbers case (type 0x05):
In this case the number of elements is moved behind the index table.
This is to get away without moving memory when one has reserved 8 bytes
in the beginning and later noticed that all 8 bytes are needed for the
byte length. For this case it is not allowed to include any padding.
- for types `0x06` -`0x09` an array of offsets (unaligned, in the number format described above) earlier offsets reside
at lower addresses. Offsets are measured from the start of the VPack value.
Non-empty arrays of types `0x06` to `0x09` have a small header including their byte length, the number of subvalues,
then all the subvalues and finally an index table containing offsets to the subvalues. To find the index table, find the
number of subvalues, then the end, and from that the base of the index table, considering how wide its entries are.
For types `0x02` to `0x05` there is no offset table and no number of items. The first item begins at address A+2, A+3,
A+5 or respectively A+9, depending on the type and thus the width of the byte length field. Note the following special
rule: The actual position of the first subvalue is allowed to be further back, after some run of padding zero bytes.
For example, if 2 bytes are used for both the byte length (BYTELENGTH), then an optional padding of 4 zero bytes is then
allowed to follow, and the actual VPack subvalues can start at A+9. This is to give a program that builds a VPack value
the opportunity to reserve 8 bytes in the beginning and only later find out that fewer bytes suffice to write the byte
length. One can determine the number of subvalues by finding the first subvalue, its byte length, and dividing the
amount of available space by it.
For types `0x06` to `0x09` the offset table describes where the subvalues reside. It is not necessary for the subvalues
to start immediately after the number of subvalues field.
As above, it is allowed to include optional padding. Again here, any padding must consist of a run of consecutive zero
bytes (ASCII NUL) and must be as long that it fills up the length of BYTELENGTH and the length of NRITEMS to 8.
For example, if both BYTELENGTH and NRITEMS can be expressed using 2 bytes each, the sum of their lengths is 4. It is
therefore allowed to add 4 bytes of padding here, so that the first subvalue could be at address A+9.
There is one exception for the 8-byte numbers case (type `0x05` ):
In this case the number of elements is moved behind the index table. This is to get away without moving memory when one
has reserved 8 bytes in the beginning and later noticed that all 8 bytes are needed for the byte length. For this case
it is not allowed to include any padding.
All offsets are measured from base A.
@ -250,23 +204,19 @@ possible, though not necessarily advised to use:
0b 00 00 00 00 00 00 00
03 00 00 00 00 00 00 00
Note that it is not recommended to encode short arrays in too long a
format.
Note that it is not recommended to encode short arrays in too long a format.
We now describe the special type 0x13, which is useful for a
particularly compact array representation. Note that to some extent this
goes against the principles of the VelocyPack format, since quick access
to subvalues is no longer possible, all items in the array must be
scanned to find a particular one. However, there are certain use cases
for VelocyPack which only require sequential access (for example JSON
dumping) and have a particular need for compactness.
We now describe the special type `0x13` , which is useful for a particularly compact array representation. Note that to
some extent this goes against the principles of the VelocyPack format, since quick access to subvalues is no longer
possible, all items in the array must be scanned to find a particular one. However, there are certain use cases for
VelocyPack which only require sequential access (for example JSON dumping) and have a particular need for compactness.
The overall format of this array type is
0x13 as type byte
BYTELENGTH
sub VPack values
NRITEMS
0x13 as type byte
BYTELENGTH
sub VPack values
NRITEMS
There is no index table at all, although the sub VelocyPack values can
have different byte sizes. The BYTELENGTH and NRITEMS are encoded in a
@ -297,24 +247,22 @@ Here is an example, the array [1, 16] can be encoded as follows:
## Objects
Empty objects are simply a single byte 0x0a.
Empty objects are simply a single byte ` 0x0a`
We next describe the type cases 0x0b to 0x12, see below for the
special compact type 0x14.
We next describe the type cases `0x0b` to `0x12` , see below for the special compact type `0x14` .
Non-empty objects look like this:
one of 0x0b - 0x12
BYTELENGTH
optional NRITEMS
sub VPack values as pairs of attribute and value
optional INDEXTABLE
NRITEMS for the 8-byte case
one of 0x0b - 0x12
BYTELENGTH
optional NRITEMS
sub VPack values as pairs of attribute and value
optional INDEXTABLE
NRITEMS for the 8-byte case
Numbers (for byte length, number of subvalues and offsets in the
INDEXTABLE) are little endian unsigned integers, using 1 byte for
types 0x0b and 0x0f, 2 bytes for types 0x0c and 0x10, 4 bytes for types
0x0d and 0x11, and 8 bytes for types 0x0e and 0x12.
Numbers (for byte length, number of subvalues and offsets in the INDEXTABLE) are little endian unsigned integers, using
1 byte for types `0x0b` and `0x0f` , 2 bytes for types `0x0c` and `0x10` , 4 bytes for types
`0x0d` and `0x11` , and 8 bytes for types `0x0e` and `0x12` .
NRITEMS is a single number as described above.
@ -323,48 +271,36 @@ The INDEXTABLE consists of:
above) earlier offsets reside at lower addresses.
Offsets are measured from the beginning of the VPack value.
Non-empty objects have a small header including their byte length, the
number of subvalues, then all the subvalues and finally an index table
containing offsets to the subvalues. To find the index table, find
number of subvalues, then the end, and from that the base of the index
table, considering how wide its entries are.
Non-empty objects have a small header including their byte length, the number of subvalues, then all the subvalues and
finally an index table containing offsets to the subvalues. To find the index table, find number of subvalues, then the
end, and from that the base of the index table, considering how wide its entries are.
For all types the offset table describes where the subvalues reside. It
is not necessary for the subvalues to start immediately after the number
of subvalues field. For performance reasons when building the value, it
could be desirable to reserve 8 bytes for the byte length and the number
of subvalues and not fill the gap, even though it turns out later that
offsets and thus the byte length only uses 2 bytes, say.
For all types the offset table describes where the subvalues reside. It is not necessary for the subvalues to start
immediately after the number of subvalues field. For performance reasons when building the value, it could be desirable
to reserve 8 bytes for the byte length and the number of subvalues and not fill the gap, even though it turns out later
that offsets and thus the byte length only uses 2 bytes, say.
There is one special case: the empty object is simply stored as the
single byte 0x0a.
There is one special case: the empty object is simply stored as the single byte `0x0a` .
There is another exception: For 8-byte numbers (0x12) the number of
subvalues is stored behind the INDEXTABLE. This is to get away without
moving memory when one has reserved 8 bytes in the beginning and later
noticed that all 8 bytes are needed for the byte length.
There is another exception: For 8-byte numbers (`0x12`) the number of subvalues is stored behind the INDEXTABLE. This is
to get away without moving memory when one has reserved 8 bytes in the beginning and later noticed that all 8 bytes are
needed for the byte length.
All offsets are measured from base A.
Each entry consists of two parts, the key and the value, they are
encoded as normal VPack values as above, the first is always a short or
long UTF-8 string starting with a byte 0x40-0xbf as described below. The
second is any other VPack value.
There is one extension: For the key it is possible to use the positive
small integer values 0x30-0x39 or an unsigned integer starting with a
type byte of 0x28-0x2f. Any such integer value is an index into an
outside-given table of attribute names. These are convenient when only
very few attribute names occur or some are repeated very often. The
standard way to encode such an attribute name table is as a VPack array
of strings as specified here.
Objects are always stored with sorted key/value pairs, sorted by bytewise
comparions of the keys on each nesting level. Sorting has some overhead
but will allow looking up keys in logarithmic time later. Note that only the
index table needs to be sorted, it is not required that the offsets in
these tables are increasing. Since the index table resides after the actual
subvalues, one can build up a complex VPack value by writing linearly.
Each entry consists of two parts, the key and the value, they are encoded as normal VPack values as above, the first is
always a short or long UTF-8 string starting with a byte `0x40` -`0xbf` as described below. The second is any other VPack
value.
There is one extension: For the key it is possible to use the positive small integer values `0x30` -`0x39` or an unsigned
integer starting with a type byte of `0x28` -`0x2f`. Any such integer value is an index into an outside-given table of
attribute names. These are convenient when only very few attribute names occur or some are repeated very often. The
standard way to encode such an attribute name table is as a VPack array of strings as specified here.
Objects are always stored with sorted key/value pairs, sorted by bytewise comparisons of the keys on each nesting level.
Sorting has some overhead but will allow looking up keys in logarithmic time later. Note that only the index table needs
to be sorted, it is not required that the offsets in these tables are increasing. Since the index table resides after
the actual subvalues, one can build up a complex VPack value by writing linearly.
Example: the object `{"a": 12, "b": true, "c": "xyz"}` can have the hexdump:
@ -386,53 +322,43 @@ entries, as in this example:
41 63 43 78 79 7a
0c 00 00 00 09 00 00 00 10 00 00 00
Similarly with type 0x0c and 2-byte offsets, byte length and number of
subvalues, or with type 0x0e and 8-byte numbers.
Similarly with type ` 0x0c` subvalues, or with type `0x0e` and 8-byte
numbers.
Note that it is not recommended to encode short objects with too long
index tables.
Note that it is not recommended to encode short objects with too long index tables.
### Special compact objects
We now describe the special type 0x14, which is useful for a
particularly compact object representation. Note that to some extent
this goes against the principles of the VelocyPack format, since quick
access to subvalues is no longer possible, all key/value pairs in the
object must be scanned to find a particular one. However, there are
certain use cases for VelocyPack which only require sequential access
We now describe the special type `0x14` , which is useful for a particularly compact object representation. Note that to
some extent this goes against the principles of the VelocyPack format, since quick access to subvalues is no longer
possible, all key/value pairs in the object must be scanned to find a particular one. However, there are certain use
cases for VelocyPack which only require sequential access
(for example JSON dumping) and have a particular need for compactness.
The overall format of this object type is
0x14 as type byte
BYTELENGTH
sub VPack key/value pairs
NRPAIRS
0x14 as type byte
BYTELENGTH
sub VPack key/value pairs
NRPAIRS
There is no index table at all, although the sub VelocyPack values can
have different byte sizes. The BYTELENGTH and NRPAIRS are encoded in a
special format, which we describe now. It is the same as for the special
compact array type 0x13, which we repeat here for the sake of
completeness.
There is no index table at all, although the sub VelocyPack values can have different byte sizes. The BYTELENGTH and
NRPAIRS are encoded in a special format, which we describe now. It is the same as for the special compact array
type `0x13` , which we repeat here for the sake of completeness.
The BYTELENGTH consists of 1 to 8 bytes, of which all but the last one
have their high bit set. Thus, the high bits determine, how many bytes
are actually used. The lower 7 bits of all these bits together comprise
the actual byte length in a little endian fashion. That is, the byte at
address A+1 contains the least significant 7 bits (0 to 6) of the byte
length, the following byte at address A+2 contains the bits 7 to 13, and
so on. Since the total number of bytes is limited to 8, this encodes
unsigned integers of up to 56 bits, which is the overall limit for the
size of such a compact array representation.
The NRPAIRS entry is encoded essentially the same, except that it
is laid out in reverse order in memory. That is, one has to use the
BYTELENGTH to find the end of the array value and go back bytes until
one finds a byte with high bit reset. The last byte (at the highest
memory address) contains the least significant 7 bits of the NRPAIRS
value, the second one bits 7 to 13 and so on.
The BYTELENGTH consists of 1 to 8 bytes, of which all but the last one have their high bit set. Thus, the high bits
determine, how many bytes are actually used. The lower 7 bits of all these bits together comprise the actual byte length
in a little endian fashion. That is, the byte at address A+1 contains the least significant 7 bits (0 to 6) of the byte
length, the following byte at address A+2 contains the bits 7 to 13, and so on. Since the total number of bytes is
limited to 8, this encodes unsigned integers of up to 56 bits, which is the overall limit for the size of such a compact
array representation.
Here is an example, the object {"a":1, "b":16} can be encoded as follows:
The NRPAIRS entry is encoded essentially the same, except that it is laid out in reverse order in memory. That is, one
has to use the BYTELENGTH to find the end of the array value and go back bytes until one finds a byte with high bit
reset. The last byte (at the highest memory address) contains the least significant 7 bits of the NRPAIRS value, the
second one bits 7 to 13 and so on.
Here is an example, the object `{"a":1, "b":16}` can be encoded as follows:
14 0a
41 61 31 42 62 28 10
@ -441,21 +367,18 @@ Here is an example, the object {"a":1, "b":16} can be encoded as follows:
## Doubles
Type 0x1b indicates a double IEEE-754 value using the 8 bytes following
the type byte. To guarantee platform-independentness the details of the
byte order are as follows. Encoding is done by using memcpy to copy the
internal double value to an uint64\_t. This 64-bit unsigned integer is
then stored as little endian 8 byte integer in the VPack value. Decoding
works in the opposite direction. This should sort out the undetermined
byte order in IEEE-754 in practice.
Type `0x1b` indicates a double IEEE-754 value using the 8 bytes following the type byte. To guarantee
platform-independentness the details of the byte order are as follows. Encoding is done by using memcpy to copy the
internal double value to an uint64\_t. This 64-bit unsigned integer is then stored as little endian 8 byte integer in
the VPack value. Decoding works in the opposite direction. This should sort out the undetermined byte order in IEEE-754
in practice.
## Dates
Type 0x1c indicates a signed 64-int integer stored in 8 bytes little
endian two's complement notation directly after the type. The value means
a universal UTC-time measured in milliseconds since the epoch, which is
00:00 on 1 January 1970 UTC.
Type `0x1c` indicates a signed 64-int integer stored in 8 bytes little endian two's complement notation directly after
the type. The value means a universal UTC-time measured in milliseconds since the epoch, which is 00:00 on 1 January
1970 UTC.
## External VPack values
@ -465,54 +388,43 @@ or network. Therefore, we only need to specify that the following k
bytes are the memcpy of a char* on the current architecture. That char*
points to the actual VPack value elsewhere in memory.
## Artificial minimal and maximal keys
## Artifical minimal and maximal keys
These values of types 0x1e and 0x1f have no meaning other than comparing
smaller or greater respectively than any other VPack value. The idea is
that these can be used in systems that define a total order on all VPack
values to specify left or right ends of infinite intervals.
These values of types `0x1e` and `0x1f` have no meaning other than comparing smaller or greater respectively than any
other VPack value. The idea is that these can be used in systems that define a total order on all VPack values to
specify left or right ends of infinite intervals.
## Integer types
There are different ways to specify integers. For small values -6 to 9
inclusively there are specific type bytes in the range 0x30 to 0x3f to
allow for storage in a single byte. After that there are signed and
unsigned integer types that can code in the type byte the number of
bytes used (ranges 0x20-0x27 for signed and 0x28-0x2f for unsigned).
There are different ways to specify integers. For small values -6 to 9 inclusively there are specific type bytes in the
range `0x30` to `0x3f` to allow for storage in a single byte. After that there are signed and unsigned integer types
that can code in the type byte the number of bytes used (ranges `0x20` -`0x27` for signed and `0x28` -`0x2f` for unsigned)
.
## Null and boolean values
These three values use a single byte to store the corresponding JSON
values.
These three values use a single byte to store the corresponding JSON values.
## Strings
Strings are stored as UTF-8 encoded byte sequences. There are two
variants, a short one and a long one. In the short one, the byte length
(not the number of UTF-8 characters) is directly encoded in the type,
and this works up to and including byte length 126. Types 0x40 to 0xbe
are used for this and the byte length is V - 0x3f, if V is the type
byte. For strings longer than 126 bytes, the type byte is 0xbf and the
byte length of the string is stored in the first 8 bytes after the type
byte, using a little endian unsigned integer representation. The actual
string follows after these 8 bytes. There is no terminating zero byte in
either case and the string may contain zero bytes.
Strings are stored as UTF-8 encoded byte sequences. There are two variants, a short one and a long one. In the short
one, the byte length
(not the number of UTF-8 characters) is directly encoded in the type, and this works up to and including byte length
126. Types `0x40` to `0xbe`
are used for this and the byte length is V - `0x3f` , if V is the type byte. For strings longer than 126 bytes, the
type byte is `0xbf` and the byte length of the string is stored in the first 8 bytes after the type byte, using a
little endian unsigned integer representation. The actual string follows after these 8 bytes. There is no
terminating zero byte in either case and the string may contain zero bytes.
## Binary data
The type bytes 0xc0 to 0xc7 allow to store arbitrary binary byte
sequences as a VPack value. The format is as follows: If V is the type
byte, then V - 0xbf bytes follow it to make a little endian unsigned
integer representing the length of the binary data, which directly
follows these length bytes. No alignment is guaranteed. The content is
The type bytes `0xc0` to `0xc7` allow to store arbitrary binary byte sequences as a VPack value. The format is as
follows: If V is the type byte, then V - `0xbf` bytes follow it to make a little endian unsigned integer representing
the length of the binary data, which directly follows these length bytes. No alignment is guaranteed. The content is
entirely up to the user.
## Packed BCD long floats
These types are used to represent arbitrary precision decimal numbers.
@ -524,57 +436,44 @@ format of these values is:
EXPONENT (as 4-byte little endian signed two's complement integer)
MANTISSA (as packed BCD-encoded integer, big-endian)
The type byte describes the sign of the number as well as the number of
bytes used to specify the byte length of the mantissa. As usual, if V is
the type byte, then V - 0xc7 (in the positive case) or V - 0xcf (in the
negative case) bytes are used for the length of the mantissa, stored as
little endian unsigned integer directly after the byte length. After
this follow exactly 4 bytes (little endian signed two's complement
integer) to specify the exponent. After the exponent, the actual
mantissa bytes follow.
The type byte describes the sign of the number as well as the number of bytes used to specify the byte length of the
mantissa. As usual, if V is the type byte, then V - `0xc7` (in the positive case) or V - `0xcf` (in the negative case)
bytes are used for the length of the mantissa, stored as little endian unsigned integer directly after the byte length.
After this follow exactly 4 bytes (little endian signed two's complement integer) to specify the exponent. After the
exponent, the actual mantissa bytes follow.
Packed BCD is used, so that each byte stores exactly 2 decimal digits as
in 0x34 for the decimal digits 34. Therefore, the mantissa always has an
even number of decimal digits. Note that the mantissa is stored in big
endian form, to make parsing and dumping efficient. This leads to the
"unholy nibble problem": When a JSON parser sees the beginning of a
longish number, it does not know whether an even or odd number of digits
follow. However, for efficiency reasons it wants to start writing bytes
to the output as it reads the input. This is, where the exponent comes
to the rescue, which is illustrated by the following example:
Packed BCD is used, so that each byte stores exactly 2 decimal digits as in `0x34` for the decimal digits 34. Therefore,
the mantissa always has an even number of decimal digits. Note that the mantissa is stored in big endian form, to make
parsing and dumping efficient. This leads to the
"unholy nibble problem": When a JSON parser sees the beginning of a longish number, it does not know whether an even or
odd number of digits follow. However, for efficiency reasons it wants to start writing bytes to the output as it reads
the input. This is, where the exponent comes to the rescue, which is illustrated by the following example. 12345 decimal
can be encoded as:
12345 decimal can be encoded as:
c8 03 00 00 00 00 01 23 45
c8 03 ff ff ff ff 12 34 50
0xc8 0x03 0x00 0x00 0x00 0x00 0x01 0x23 0x45
0xc8 0x03 0xff 0xff 0xff 0xff 0x12 0x34 0x50
The former encoding puts a leading 0 in the first byte and uses exponent 0, the latter encoding directly starts putting
two decimal digits in one byte and then in the end has to "erase" the trailing 0 by using exponent -1, encoded by the 4
byte sequence `ff ff ff ff` .
The former encoding puts a leading 0 in the first byte and uses exponent
0, the latter encoding directly starts putting two decimal digits in one
byte and then in the end has to "erase" the trailing 0 by using exponent
-1, encoded by the 4 byte sequence 0xff 0xff 0xff 0xff.
There for the unholy nibble problem is solved and parsing (and indeed
dumping) can be efficient.
Therefore, the unholy nibble problem is solved and parsing (and indeed dumping) can be efficient.
## Tagging
Types 0xee-0xef are used for tagging of values to implement logical
types.
Types `0xee` -`0xef` are used for tagging of values to implement logical types.
For example, if type 0x1c did not exist, the database driver could
serialize a timestamp object (Date in JavaScript, Instant in Java, etc)
into a Unix timestamp, a 64-bit integer. Assuming the lack of schema,
upon deserialization it would not be possible to tell an integer from
a timestamp and deserialize the value accordingly.
For example, if type `0x1c` did not exist, the database driver could serialize a timestamp object (Date in JavaScript,
Instant in Java, etc)
into a Unix timestamp, a 64-bit integer. Assuming the lack of schema, upon deserialization it would not be possible to
tell an integer from a timestamp and deserialize the value accordingly.
Type tagging resolves this by attaching an integer tag to values that
can then be read when deserializing the value, e.g. that tag=1 is a
timestamp and the relevant timestamp class should be used.
Type tagging resolves this by attaching an integer tag to values that can then be read when deserializing the value,
e.g. that tag=1 is a timestamp and the relevant timestamp class should be used.
The tag values are specified separately and applications can also
specify their own to have the database driver deserialize their specific
data types into the appropriate classes (including models).
The tag values are specified separately and applications can also specify their own to have the database driver
deserialize their specific data types into the appropriate classes (including models).
Essentially this is object-relational mapping for parts of documents.
@ -600,22 +499,47 @@ to derive the byte length of each custom data type.
The following user-defined types exist:
- 0xf0 : 1 byte payload, directly following the type byte
- 0xf1 : 2 bytes payload, directly following the type byte
- 0xf2 : 4 bytes payload, directly following the type byte
- 0xf3 : 8 bytes payload, directly following the type byte
- 0xf4-0xf6 : length of the payload is described by a single further
unsigned byte directly following the type byte, the
payload of that many bytes follows
- 0xf7-0xf9 : length of the payload is described by two bytes (little
endian unsigned integer) directly following the type
byte, the payload of that many bytes follows
- 0xfa-0xfc : length of the payload is described by four bytes (little
endian unsigned integer) directly following the type
byte, the payload of that many bytes follows
- 0xfd-0xff : length of the payload is described by eight bytes (little
endian unsigned integer) directly following the type
byte, the payload of that many bytes follows
Note: In types 0xf4 to 0xff the "payload" refers to the actual data not
including the length specification.
- `0xf0` : 1 byte payload, directly following the type byte
- `0xf1` : 2 bytes payload, directly following the type byte
- `0xf2` : 4 bytes payload, directly following the type byte
- `0xf3` : 8 bytes payload, directly following the type byte
- `0xf4` -`0xf6` : length of the payload is described by a single further unsigned byte directly following the type byte,
the payload of that many bytes follows
- `0xf7` -`0xf9` : length of the payload is described by two bytes (little endian unsigned integer) directly following
the type byte, the payload of that many bytes follows
- `0xfa` -`0xfc` : length of the payload is described by four bytes (little endian unsigned integer) directly following
the type byte, the payload of that many bytes follows
- `0xfd` -`0xff` : length of the payload is described by eight bytes (little endian unsigned integer) directly following
the type byte, the payload of that many bytes follows
Note: In types `0xf4` to `0xff` the "payload" refers to the actual data not including the length specification.
## Portability
Serialized booleans, integers, strings, arrays, objects etc. all have a defined endianess and length, which is
platform-independent. These types are fully portable in serialized VelocyPack.
There are still a few caveats when it comes to portability:
It is possible to build up very large values on a 64 bit system, but it may not be possible to read them back on a 32
bit system. This is because the maximum memory allocation size on a 32 bit system may be severely limited compared to a
64 bit system, i.e. a 32 bit OS may simply not allow to allocate buffers larger than 4 GB. This is not a limitation of
VelocyPack, but a limitation of 32 bit architectures. If all VelocyPack values are kept small enough so that they are
well below the 32 bit length boundaries, this should not matter though.
The VelocyPack type *External* contains just a raw pointer to memory, which should only be used during the buildup of
VelocyPack values in memory. The *External* type is not supposed to be used in VelocyPack values that are serialized and
stored persistently, and then later read back from persistence. Doing it anyway is not portable and will also pose a
security risk. Not using the *External* type for any data that is serialized will avoid this problem entirely.
The VelocyPack type *Custom* is completely user-defined, and there is no default implementation for them. So it is up to
the embedder to make these custom type bindings portable if portability of them is a concern.
VelocyPack *Double* values are serialized as integer equivalents in a specific way, and unserialized back into integers
that overlay a IEEE-754 double-precision floating point value in memory. We found this to be sufficiently portable for
our needs, although at least in theory there may be portability issues with some systems.
The [following ](https://en.wikipedia.org/wiki/Endianness#Floating_point ) was used as a backing for our "reasonably
portable in the real world" assumptions:
> It may therefore appear strange that the widespread IEEE 754 floating-point standard does not specify endianness.[17] Theoretically, this means that even standard IEEE floating-point data written by one machine might not be readable by another. However, on modern standard computers (i.e., implementing IEEE 754), one may in practice safely assume that the endianness is the same for floating-point numbers as for integers, making the conversion straightforward regardless of data type.
