The Erlang compiler runs based on a global state built from currently
loaded libraries and the configured code path that is available. For
this reason, the rebar3 compiler job unloads all plugin paths before
calling the Erlang compiler.
However, this causes a problem when an application uses a custom
resource handler with a dynamic version in their .app.src file since the
plugin that can be used to find the version has been unloaded.
Fortunately, the compile phase that runs the version handling is
distinct from the phase that uses the Erlang compiler. This patch fixes
the problem by re-loading the plugins' paths in memory before generating
the .app file, and before unloading them afterwards.
It appears that unloading them is unnecessary because the hooks after
that will re-load them, but it is likely better to play it safe with
that global state and clean up after ourselves. It offers better
protection for future changes.
Fixes#1657
Current rebar3 uses debug_info rules where debug_info is added by
default, and no_debug_info prevents the default from being added, and
removes any explicit debug_info, if any. The problem is that if
'no_debug_info' is anywhere in the config for a run, it cannot be
removed even with other profiles. additionally, no_debug_info ignores
special tuples like {debug_info, {Mod, Data}} and {debug_info_key, Key},
which can be used to add debug info and encrypt it (in lieu of plain
debug_info) respectively.
This patch makes it so that the following rules are in place:
- the last option seen takes priority, allowing profile overrides by
the ordering rules the compiler expects
- the overriden options shall be explicitly deleted to avoid confusing
the compiler
- any option related to debug info seen last cancels any no_debug_info
that preceded it
- any no_debug_info option seen last cancels all of the other
debug_info options
- if debug_info is seen last, it cancels out {debug_info_key, Key}
- if {debug_info_key, Key} is seen last, it cancels out debug_info
- All other options are left untouched in that context (defines can
still be expanded and so on)
This should allow proper profile rules to be followed. Note that erl_opt
profile merging puts precedence on the *last* element of a list, to
match the compiler.
When fetching deps, if this is a clean repo there will be extensive
messages warning that dependencies which have already been fetched are
being skipped. For large projects being built and tested in a clean
environment this significantly increases the noise level of the build.
This modification adds an additional rebar option
(deps_warning_on_conflict) that will allow disabling these warning
messages. If deps_error_on_conflict is set, an error will still be
thrown. This will not change default behaviour of rebar.
There is a similar outstanding issue:
https://github.com/erlang/rebar3/issues/1105
However this seems to be a push for not outputting warnings when the dep
version is the same, rather than disabling warnings altogether.
- OTP-21 readiness, Full Unicode support, massive dep upgrade
- fixed handling of proxy username and password when fetching registry
- git versions from tag made consistent and all strip 'v' prefix
- Prevent hard crash on duplicate plugin paths
- Fix include paths in profile multiapp edge case
- Fix unlock state carry, which broke do sequences with unlock in them.
- Avoid guessing on utf8 decoding of app files
- Various fixes related to .app files
- Warn user when an unsupported local git or hg resource is used
- Corrects a fix to src_dir values
- Update eunit_formatters to latest version
- Changes in wording of warnings for more accuracy
This replaces all deprecated function usage by alternative ones based on
a version switch enacted at compile time, preventing all warnings.
This will likely introduce some possible runtime errors in using a
Rebar3 compiled on OTP-20 or OTP-21 back in versions 19 and earlier, but
we can't really work around that.
A bunch of dependencies have been updated to support OTP-21 without
warnings as well.
The compiling of OTP applications is done by first topographically
sorting them according to their dependencies, deps-first. This allows
all compilation to take place in order. In the current code, the same
logic extends to top-level applications in an umbrella project.
Unfortunately, there are cases where this is not going to be true: when
an application has extra_src_dirs entries (or additional directories or
files) to conditionally compile under some profiles, it may start
depending on another top-level application dedicated to that profile for
include files.
However, such an app will never make it to production and neither will
the compilation artifacts that create the dependency. Under that
scenario, current rebar3 is unusable.
This patch makes it so that the compilation provider instead changes the
logic for top-level apps: rather than copying their directories one by
one and compiling them in order, it:
1. copies all top-level apps to the build directory so the files are in
their proper locations
2. adds the top-level apps to the path (after the global hooks have run,
so the existing scope and env has not changed)
3. runs the compilation as usual.
Fixes#1651
When a global plugin is used both locally and within the project, there
are cases when the rebar3 program will hard crash (killed in do_boot).
This has been traced to plugin-handling in compilation, where the same
code path may be purged twice in a row without further reloading for the
compile operation.
This of course yields the result where the code handling on the VM kills
all processes holding references to the module in memory, in this case
the rebar3 process itself.
By deduplicating the paths first, we ensure at most one purge before
reloading plugins and paths, and this prevents a hard crash.
Rather than trying one method and then the other, allow the caller to
specify the encoding of the expected file. All other schemes are risky
and won't work well.
Rollback the function's default interface to the binary format in case
any plugin used it for non-unicode content, preserving backwards compat.
The parsing functions were used inconsistently, and the returned values
were bad in some clauses; things only worked because they are never used
within rebar3. This ensures the return types are consistent on all
clauses.
The previous patch at #7c959cc fixed the usage of duplicate values
for directories through relative paths, but mistakenly went overboard
and dropped the `./` path, which is still fairly common. Similarly for
`../".
The code is modified to special-case such values and keep the code
working.
When fetching src_dir values, some relative paths can be inserted. When
deduplicating the paths on the fetch, this fact means that logically
duplicate (but literally different) directories can be returned at once.
By normalizing the names, duplication bugs can be resolved.
Specifically, this impacts profiles. It appears that relx as a whole
requires its configuration to be merged in one tuple order (New takes
precedence over Old), whereas the overlays require the opposite (Old
takes precedence over New) since the operation order on disk is
important to work well.
This patch reorders overlay values such that the overlay of a profile
takes place *after* the basic overlay, ensuring that the profile actions
take place after the basic ones; this allows profiles to properly
overwrite files as expected (see #1609)
This is done while adequately maintaining the order of operations that
were required as part of #1563
Overlay vars of profiles are also checked to be working fine, along with
a test.
This fixes#1247 and #1609
When a config file exists at the root of a project, defines a given
configuration value for a given profile, and that a sub-application
(umbrella app) also has the same profile defined with the same key (but
different values), the configuration values of the sub-application's
profile would get silently dropped.
The problem being that when the function to merge profiles is applied
recursively, it is applied to each profile (so it will merge on the keys
test, prod, etc.) rather than to each of the values of each profile.
This patch reworks the profile merging so that the current behaviour is
respected overall (a profile cannot be cancelled by a subdep's
non-existant profile since its value should have been ignored), but
ensures that sub-deps' profiles are otherwise applied recursively with
the proper rules:
- dependencies favor prior values
- plugins favor new values
- erl_first_files combine the lists
- relx uses the tuple merge algorithm
- erl_opts has its own custom merge as well
- otherwise the new value takes precedence
A test has also been added.
There is a risk of breakage in some applications that may have relied on
the buggy behaviour to work, though at this time we are aware of none of
them.
During the building of escripts, multiple passes are done. Two of them
may end up duplicating content: one that gathers all of the beam files
that will be needed for the app to work, and a second one that goes over
the ebin/ directory of the root application to grab all the stuff in
there, prior to the run.
This allows to grab whatever could be required for runtime without
breaking the rest (or so I think), and sticks them at the front of the
archive, where it needs to sit for things to work fine.
Whenever the ebin/ directory contains a pre-compile .beam file, it gets
fetched both from the first pass described and the latter one. This
results in duplicate entries in the resulting zip files used for the
escript and makes the executable larger than it needs to be.
The patch is a simple 1:1 removal of duplicate values. Since
large pre-populated ebin/ directories are pretty rare, this should not
be too costly for the vast majority of users.
Fixes#1577
The code for symlink handling failed whenever a win32 platform with no
symlink capability would be detected. This patch is provided by
William H from the support ticket at
http://www.rebar3.org/v3/discuss/598225c90365bb00144bc07f, which
adds detection of failures in non-NTFS scenarios on Win32, and then
copies files instead of bailing out.
The end result should be appropriate support for such a platform.
This is done through 3 main change groups:
- replacing `~s` by `~ts` in format strings, so that strings that
contain unicode are properly printed rather than crashing
- adding the `unicode` argument to all function of the `re` module to
ensure transformations on strings containing unicode data are valid
instead of crashing (see issue #1302)
- replacing `ec_cnv:to_binary/1` and `ec_cnv:to_list/1` with matching
functions in `rebar_utils`.
The last point has been done, rather than modifying and updating erlware
commons, because binary and list conversions can be a contentious
subject. For example, if what is being handled is actually bytes from a
given binary stream, then forcing a byte-oriented interpretation of the
data can corrupt it. As such, it does not appear safe to modify erlware
commons' conversion functions since it may not be safe for all its
users.
Instead, rebar3 reimplements a subset of them (only converting
atoms and chardata, ignoring numbers) with the explicit purpose of
handling unicode string data.
Tests were left as unchanged as possible. This may impact the ability to
run rebar3's own suites in a unicode path, but respects a principle of
least change for such a large patch.
This can be reproduced by running xref analysis against a rebar3
plugin project which doesn't list rebar3 as an explicit dependency
-- calls to certain bundled modules ('rebar_state', 'rebar_api',
'ec_cnv', ...) will result in a failed pattern match as these modules
appear to have had their abstract code stripped.
The use case has been described in issue #1478 where a local application
can exist while being declared as a dependency as well. This allows, for
example, to work on a release where all applications may require to be
published independently, or to provide some form of 'vendoring' with a
local app.
The fix is done by decoupling the dependency source resolution form the
dependency parsing. The reason for this being that the discovery phase
needs to parse apps for their top-level deps, and dep installation needs
to resolve the packages with accuracy. In the current implementation,
both code paths call to the same function.
This patch splits up the precise discovery and makes it happen *only*
when installing dependencies, and only if a top-level app does not
already define the application needing resolving.
One weakness of this fix is that it necessarily breaks cycle detection
in dependencies that involve a root application depending on itself
since its own version as a dep will not be expanded. There appears to be
no possible way to prevent this, but should be rare enough to be worth
the tradeoff for the common case.
Similarly to PATH env variable, this allows to pass paths to bare
compiler which do not fit nicely into a single wildcard structure.
Colon (":") is used as separator.
This provides more flexibility when rebar is run in offline/hermetic
environment, e.g. #958 and #1281.
I noticed this when trying to include entop in a release. Entop uses
cecho which takes over the terminal, so you do not want it loaded or
started. According to http://erlang.org/doc/man/rel.html, when you
specify a Type of none it should not load or start, but the code for
it's modules should be loaded. This patch ensures the code is not
loaded or started, but doesn't do anything with the code paths.
At the very least this allows me to start a shell in the case where
I have an application of type none, and the application is neither
loaded nor started.
When a given behaviour module does not exist, rebar3 brutally crashes.
This patch makes it so instead, there is a warning output menitoning the
missing behaviour, and this one is omitted from the unused function
calls check. This means that unused calls will instead be shown for the
module implementing a non-existing behaviour, as if no behaviour were
declared in the first place.
Fred Hebert
Liam McNamara
Andrey Kanyuka
Tristan Sloughter
Jimmy Zöger
suexcxine
patrick cieplak
Vitor Enes Duarte
William H
Guilherme Andrade
Mikhail Kalashnikov
Sam Sawan
Gleb Peregud
Anthony Molinaro
getong