Deps command shows an * if the local state of the dependencies do not
match the config file, highlighting the differences between the lock
file and the config file if there are any.

This patch does two things:

1. it broadens the interface for the compiler module so that
   non-first-file modules can possibly be parallelized. This is done by
   dynamically switching on `[ListOfFiles]`, which remains sequential as
   before, or `{[SeqPriority], [Parallel]}`, which divides regular files
   between higher priority ones and those that can be in parallel
2. implements this mechanism in the rebar compiler, based on the erl
   file digraph. If a file has an in-neighbour, it is depended on by
   another file. The mechanism therefore makes it so all files that have
   dependants get compiled in their strict relative sequential order
   first, and then the undepended-on files get compiled together in
   parallel.

By running:

  ./rebar3 ct --suite test/rebar_compile_SUITE.erl --case \
  recompile_when_parse_transform_inline_changes --repeat 50

the previous iteration of this would rapidly fail, and this one succeeds
every time.

Support for parallel compilation of *.erl file was dropped before 3.0 release.
However, our tests for a project containing ~500 source files show substantial gain, lowering compilation time from 58 seconds to 18 on a MacBook Pro 15" (4 cores, 8 threads), and to just 10 seconds on Xeon-D machine.

deps command was printing an * even when deps were updated, this commit
makes it call rebar_fetch:needs_update/2 for each of them

Previously all escriptize hooks from all apps in the project were
executed, which could lead to issue in case of dependencies on artifacts
which are created by these hooks.

Now the behaviour is similar to the handling of other non-global hooks.

This currently just checks for the existence of the description and applications
keys and that the applications list has kernel and stdlib in it.

We currently have a problem in the handling of locks in the `upgrade
<app>` command when a transitive dependency switches supervision trees.

If we start with:

      A
     / \
    B1  C
        |
        D
        |
        E

And upgrade to:

      A
     / \
    B2  C
    |   |
    E   D

by calling `rebar3 upgrade b`, we would expect the ugprade command to do
so directly. However we are currently left with the following lock file:

      A
     / \
    B2  C
        |
        D
        |
        E

This is _not_ critical since on the next run, the lock file is fixed
automatically through an install-deps sequence. However, this is a
jarring state in which to leave a project.

The reason is that we proceed the following way to handle an upgrade:

1. pick the name of the chosen app, and unlock it if it's at the level 0
2. grab a list of all its current children (and their own) and unlock
   them
3. do the same for all the other unlocked dependencies
4. pass this new lock internal format to the get-deps provider in
   upgrade mode
5. take the result and save it to the lock file.

What's interesting is that right now this yields invalid locks at
step 3, because we have removed the lock on B1, but not on E
(which we don't yet know is going to be a new child of the next
B version until we fetch it)

In step 4, we fetch dependencies, and in there we compare the
pre-upgrade locks and fetch structure with those expected in the current
lock state, and rebuild everything.

The fix in this commit adds a check there where if the app is in the
current lock set at a level deeper than the current one, the lock is
forced to be refreshed as if it were not there. This lock would get
refreshed on a blank run anyway since the current lock set would start
empty (rather than pre-populated by `upgrade`), and the level-order
traversal ensures that the locks remain safe in all cases.

Fixes #2030

- vendor in hex_core at v0.5.0
  - Change where repo_name should be the org and not the parent
  - Changed rebar_utils:url_append_path/2 to not explicitly add a '?',
    this is returned in the Query chunk by http_uri:parse/1 (e.g., "?foo=bar")
  - update organization_merging test to expect the sub-repo as the repo_name
  - Add tests for rebar_utils:url_append_path/2
  - Stop referencing/setting "organization" in config and use new
     organization settings (api_repository and repo_organization)
  - Do not set (assume) the read key is valid for any/every repo
  - Set repo_organization and api_repository to org
  - Update tests to check for new config opts

- Modified rebar_hex_repos:auth_config/1 to abort on error except in
 the case of enoent, in which we return an empty map.
 - added auth_config_errors test to test/rebar_pkg_repos_SUITE

by default, all apps except internal rebar3 ones can be blacklisted.
Some months ago, someone added support for configurable lists within
rebar3 itself using the .app env.

This PR re-exports that functionality from the rebar.config file, so
that one can set something like:

    {shell, [
      {app_reload_blacklist, [cowboy, ranch]}
    ]}.

Which will allow to prevent applications that often crash when being
reloaded from doing so. For example, cowboy and ranch processes can be
stuck in an accept call for multiple reloads in dev, which ends up
causing large failures.

This change fixes cases where changes in .hrl files would not be picked
up in .erl files that are in extra source directories (such as those
defined with `extra_src_dirs` or modules in the test/ directory during a
CT or Eunit run).

The problem was due to the way the Directed Acyclic Graph (DAG) of
dependencies between files was being loaded and stored by the compiler
modules.

Prior to this fix, a single DAG would be used for all runs. On a regular
run, the prior DAG is loaded from disk, re-checked, and if changed, it
would get re-written to disk with the changes deciding what to
re-compile. However, whenever extra source directories were specified, a
second run would be done which swaps target directories around in the
compiler modules.

Bug 1: this second run was done without properly tracking the private .hrl
files (in src/), so the changes were invisible. This has been fixed by
re-adding the paths.

The problem is that the DAG handling is self-contained; just invoking it
was sufficient to get it loaded and rewritten to disk. But since runs
with extra src dirs were done on different sets, the compilation of
extra src dirs would be done with bad historical data (all the modules
in src/ are dropped, all those in test/ are re-added); this DAG was then
written to disk once again, polluting the next non-extra run.

This is bug 2, and it is fixed by adding an optional label to each run
so that a regular or extra compile round can be distinguished, each
tracking their own files in their own DAG.

A single test (and a lot of diffing) were sufficient for this.

Allows to select one of many releases conditionally.
Default behaviour should be unchanged from existing one.

Can filter on only the version or only the name, or both.

Starting with OTP-21.2.3, some output appears to be sent to the shell
while we're taking down the TTY, which ends up stalling the whole log
flow for the default handler. I don't have proof but suspect this is due
to the system logging going directly from the ERTS runtime to the
logger, which may be trigger when we kill the TTY driver.

This patch makes it so whenever we detect that logger is active, we save
the default config, disable the default logger, and only then we can
kill the TTY driver. Once the driver is started and all the group
leaders have been rewritten, the default logger is re-added.

This all takes place _before_ the logger configuration is updated as
part of booting apps, and the change should be fully backwards
compatible.

Partially reverts commit f52a115ea9

Fixes #2003

Needs tests to prevent a future regression.

When the commit at
8c4a74a3ed
introduced a recursive search for build elements, it accidentally did so
using a function that accepts a regex for its match.

In doing so, if a behaviour or include had a name such as
`common_prefix` and that multiple other modules used the name
`common_prefix_<rest_of_name>`, all the other files would be seen as
dependencies to be checked in a directed graph.

This resulted in continuous re-checking of files that kept depending on
each others and blew the compile time up exponentially.

By using a delimitation on the regex (^<modulename>$), the build comes
back down to finding only the right files and becomes fast again.

This change makes it so umbrella projects get ordered in a way more
in-line with what we do with non-umbrellas.

For example, a non-umbrella app (rebar3 itself) gives output like:

    └─ rebar─3.8.0+build.4270.refaece1d7 (project app)
       ├─ bbmustache─1.6.0 (hex package)
       ├─ certifi─2.3.1 (hex package)
       ├─ cf─0.2.2 (hex package)
       ├─ cth_readable─1.4.2 (hex package)
       ├─ erlware_commons─1.3.1 (hex package)
       ├─ eunit_formatters─0.5.0 (hex package)
       ├─ getopt─1.0.1 (hex package)
       ├─ hex_core─0.4.0 (hex package)
       ├─ parse_trans─3.3.0 (hex package)
       ├─ providers─1.7.0 (hex package)
       ├─ relx─3.28.0 (hex package)
       └─ ssl_verify_fun─1.1.3 (hex package)

The current (prior to this patch) output for an umbrella project looks
like this:

    ├─ bootstrap─0.0.2 (git repo)
    ├─ dirmon─0.1.0 (project app)
    ├─ fake─0.1.0 (project app)
    ├─ file_monitor─0.1 (git repo)
    ├─ peeranha─0.1.0 (git repo)
    │  ├─ gproc─0.5 (git repo)
    │  ├─ interclock─0.1.2 (git repo)
    │  │  ├─ bitcask─1.7.0 (git repo)
    │  │  │  └─ lager─2.1.1 (hex package)
    │  │  │     └─ goldrush─0.1.6 (hex package)
    │  │  └─ itc─1.0.0 (git repo)
    │  └─ merklet─1.0.0 (git repo)
    ├─ recon─2.2.2 (git repo)
    └─ uuid─1.5.0 (git repo)
       └─ quickrand─1.5.0 (git repo)

Which kind of looks odd because the layout represents the dependencies
of deps as declared by the rebar3 config files, but mix up the project
apps as dependencies. This turns out to break expectations, and some
external tools (such as Blackduck's dep detection -- see
d8a0f2281a/hub-detect/src/main/groovy/com/blackducksoftware/integration/hub/detect/detector/hex/Rebar3TreeParser.java)
which were developed with regular apps in mind, but not umbrellas.

This PR changes things by reordering all project apps at the root level
and putting them first, and then indenting all deps below them. The same
app now looks like:

    ├─ dirmon─0.1.0 (project app)
    └─ fake─0.1.0 (project app)
       ├─ bootstrap─0.0.2 (git repo)
       ├─ file_monitor─0.1 (git repo)
       ├─ peeranha─0.1.0 (git repo)
       │  ├─ gproc─0.5 (git repo)
       │  ├─ interclock─0.1.2 (git repo)
       │  │  ├─ bitcask─1.7.0 (git repo)
       │  │  │  └─ lager─2.1.1 (hex package)
       │  │  │     └─ goldrush─0.1.6 (hex package)
       │  │  └─ itc─1.0.0 (git repo)
       │  └─ merklet─1.0.0 (git repo)
       ├─ recon─2.2.2 (git repo)
       └─ uuid─1.5.0 (git repo)
          └─ quickrand─1.5.0 (git repo)

Now the project apps are back at the top, and all the dependencies
follow at one level of indentation below.

There is no recorded change for single-app projects.

- removed deprecated maintainers field from config template in
  rebar_prv_packages

This switch aborts the rebar3 run after the first test failure is
reported.

Since Common Test does not support this feature and it can be useful for
interactive development (a demand from one of the teams I work with), I
decided to add the feature as an experimental CT hook.

The hook notices any test failure, and forcefully aborts the current
script execution, but only during the initialization phase of the next
test; this ensure that all other hooks for a post-test failure have the
time to do things right.

The CT logs _will_ be interupted, and hooks of all kinds may also
suffer.

Since this might be a bit tricky to support internally, I will be fine
with a review that results in "no, Fred. Please test this in a project
plugin first" or if I get told to use profiles to mature the feature
(i.e. `rebar3 as failfast ct ...`) with a custom hook declaration.

For issue https://github.com/erlang/rebar3/issues/1974
Revert "add rebar.lock to template gitignore"

This reverts commit 8fb8a91130.

For issue https://github.com/erlang/rebar3/issues/1974

- fixes systests on darwin where previously the recursive cp would fail
   due to everything being copied after the last forward slash.
   Specifically, everything in  `systest/all_SUITE_data/` would be
   copied but not `all_suite_data` dir itself which the tests expected.

mostly copy/paste from rebar_compiler_erl

- Added support to rebar_prv_xref for filtering out whole module. A
  module may now be added to the list of xref_ignores in rebar.config or
  via -ignore_xref() module attribute
  - Added unit test for whole module filtering support to xref CT suite