Bump cth_readable

Handles some internal changes in logger in OTP-21.2 that broke the
follow-up error printouts after the first failure of a CT run

Support setting shell hot code loading blacklists

by default, all apps except internal rebar3 ones can be blacklisted.
Some months ago, someone added support for configurable lists within
rebar3 itself using the .app env.

This PR re-exports that functionality from the rebar.config file, so
that one can set something like:

    {shell, [
      {app_reload_blacklist, [cowboy, ranch]}
    ]}.

Which will allow to prevent applications that often crash when being
reloaded from doing so. For example, cowboy and ranch processes can be
stuck in an accept call for multiple reloads in dev, which ends up
causing large failures.

Add --relvsn and --relname to rebar3 shell

Fix handling of updated files in extra_src_dirs

This change fixes cases where changes in .hrl files would not be picked
up in .erl files that are in extra source directories (such as those
defined with `extra_src_dirs` or modules in the test/ directory during a
CT or Eunit run).

The problem was due to the way the Directed Acyclic Graph (DAG) of
dependencies between files was being loaded and stored by the compiler
modules.

Prior to this fix, a single DAG would be used for all runs. On a regular
run, the prior DAG is loaded from disk, re-checked, and if changed, it
would get re-written to disk with the changes deciding what to
re-compile. However, whenever extra source directories were specified, a
second run would be done which swaps target directories around in the
compiler modules.

Bug 1: this second run was done without properly tracking the private .hrl
files (in src/), so the changes were invisible. This has been fixed by
re-adding the paths.

The problem is that the DAG handling is self-contained; just invoking it
was sufficient to get it loaded and rewritten to disk. But since runs
with extra src dirs were done on different sets, the compilation of
extra src dirs would be done with bad historical data (all the modules
in src/ are dropped, all those in test/ are re-added); this DAG was then
written to disk once again, polluting the next non-extra run.

This is bug 2, and it is fixed by adding an optional label to each run
so that a regular or extra compile round can be distinguished, each
tracking their own files in their own DAG.

A single test (and a lot of diffing) were sufficient for this.

Allows to select one of many releases conditionally.
Default behaviour should be unchanged from existing one.

Can filter on only the version or only the name, or both.

Unhang logger when swapping the TTY in shell

Starting with OTP-21.2.3, some output appears to be sent to the shell
while we're taking down the TTY, which ends up stalling the whole log
flow for the default handler. I don't have proof but suspect this is due
to the system logging going directly from the ERTS runtime to the
logger, which may be trigger when we kill the TTY driver.

This patch makes it so whenever we detect that logger is active, we save
the default config, disable the default logger, and only then we can
kill the TTY driver. Once the driver is started and all the group
leaders have been rewritten, the default logger is re-added.

This all takes place _before_ the logger configuration is updated as
part of booting apps, and the change should be fully backwards
compatible.

Use double quotes in git shell command on Windows

Partially reverts commit f52a115ea9

Fixes #2003

Needs tests to prevent a future regression.

Reorder rebar3 tree output on umbrella apps

Fix performance regression in compiler around behaviours

When the commit at
8c4a74a3ed
introduced a recursive search for build elements, it accidentally did so
using a function that accepts a regex for its match.

In doing so, if a behaviour or include had a name such as
`common_prefix` and that multiple other modules used the name
`common_prefix_<rest_of_name>`, all the other files would be seen as
dependencies to be checked in a directed graph.

This resulted in continuous re-checking of files that kept depending on
each others and blew the compile time up exponentially.

By using a delimitation on the regex (^<modulename>$), the build comes
back down to finding only the right files and becomes fast again.

This change makes it so umbrella projects get ordered in a way more
in-line with what we do with non-umbrellas.

For example, a non-umbrella app (rebar3 itself) gives output like:

    └─ rebar─3.8.0+build.4270.refaece1d7 (project app)
       ├─ bbmustache─1.6.0 (hex package)
       ├─ certifi─2.3.1 (hex package)
       ├─ cf─0.2.2 (hex package)
       ├─ cth_readable─1.4.2 (hex package)
       ├─ erlware_commons─1.3.1 (hex package)
       ├─ eunit_formatters─0.5.0 (hex package)
       ├─ getopt─1.0.1 (hex package)
       ├─ hex_core─0.4.0 (hex package)
       ├─ parse_trans─3.3.0 (hex package)
       ├─ providers─1.7.0 (hex package)
       ├─ relx─3.28.0 (hex package)
       └─ ssl_verify_fun─1.1.3 (hex package)

The current (prior to this patch) output for an umbrella project looks
like this:

    ├─ bootstrap─0.0.2 (git repo)
    ├─ dirmon─0.1.0 (project app)
    ├─ fake─0.1.0 (project app)
    ├─ file_monitor─0.1 (git repo)
    ├─ peeranha─0.1.0 (git repo)
    │  ├─ gproc─0.5 (git repo)
    │  ├─ interclock─0.1.2 (git repo)
    │  │  ├─ bitcask─1.7.0 (git repo)
    │  │  │  └─ lager─2.1.1 (hex package)
    │  │  │     └─ goldrush─0.1.6 (hex package)
    │  │  └─ itc─1.0.0 (git repo)
    │  └─ merklet─1.0.0 (git repo)
    ├─ recon─2.2.2 (git repo)
    └─ uuid─1.5.0 (git repo)
       └─ quickrand─1.5.0 (git repo)

Which kind of looks odd because the layout represents the dependencies
of deps as declared by the rebar3 config files, but mix up the project
apps as dependencies. This turns out to break expectations, and some
external tools (such as Blackduck's dep detection -- see
d8a0f2281a/hub-detect/src/main/groovy/com/blackducksoftware/integration/hub/detect/detector/hex/Rebar3TreeParser.java)
which were developed with regular apps in mind, but not umbrellas.

This PR changes things by reordering all project apps at the root level
and putting them first, and then indenting all deps below them. The same
app now looks like:

    ├─ dirmon─0.1.0 (project app)
    └─ fake─0.1.0 (project app)
       ├─ bootstrap─0.0.2 (git repo)
       ├─ file_monitor─0.1 (git repo)
       ├─ peeranha─0.1.0 (git repo)
       │  ├─ gproc─0.5 (git repo)
       │  ├─ interclock─0.1.2 (git repo)
       │  │  ├─ bitcask─1.7.0 (git repo)
       │  │  │  └─ lager─2.1.1 (hex package)
       │  │  │     └─ goldrush─0.1.6 (hex package)
       │  │  └─ itc─1.0.0 (git repo)
       │  └─ merklet─1.0.0 (git repo)
       ├─ recon─2.2.2 (git repo)
       └─ uuid─1.5.0 (git repo)
          └─ quickrand─1.5.0 (git repo)

Now the project apps are back at the top, and all the dependencies
follow at one level of indentation below.

There is no recorded change for single-app projects.

Clear _build/bootstrap on each bootstrap run

update template moving maintainers into extras field

fix case clause when fetching hg dep

This should avoid common problems when upgrading across versions where
old code kind of messes up a lot of things and clearing _build keeps
being required.

update relx to 3.28.0

Remove unnecessary clauses in update_package/3

Update hex_core and add mirror_of repo config

- removed deprecated maintainers field from config template in
  rebar_prv_packages

Add --generator option for eunit